Stampede Ultimate 1/8 scale chassis
- Extended 1 7/8" over stock length.
- Machined out of Billet 6061-T6 Aluminum.
- 1/4" Thick to handle Extreme Abuse.
- Designed to work with either stock or
after-market chassis braces and skid-
plates.
- Receiver and ESC BOLT to chassis, NO
MORE zip ties or Velcro straps!
- INCLUDES OFNA antenna mount and all
mounting hardware.
- Machined for after-market ESC power
switches. No more zip ties to hold the
power switch. We have machined a
special cutout and drilled/tapped holes.
- Uses Roll-Form Taps making threads 60%
stronger than standard threads.
- Chassis weighs only 7 oz.
REM 1000 $50.00
REM Front Shock Tower
- Machined out of Billet 6061-T6 Aluminum.
- Will work with any shock up to 1" thick
which allows the use of T-Maxx shocks.
- .200" (5mm) Thick to handle Extreme
Abuse.
- Designed to work with stock or after-
market front bulkheads.
- 24 shock mount locations and 10
camber link mount locations for the
ultimate in tuning your suspension.
- Billet Aluminum shock standoffs.
- All mounting hardware included
- Uses Roll-Form Taps making threads
60% stronger than standard threads.
REM 1010 $18.00
REM Stampede Battery Holders
- Made from Billet 6061-T6 Aluminum for
strength and light weight.
- Protects the battery and holds it tight to
eliminate the possibility of it coming
loose unlike competitors flimsy
aluminum, or cheap Velcro straps.
- Adjustable height to accommodate
thicker or hump packs.
- Hold Downs weigh only 1 oz each.
- Hold-Downs work as a heat-sink for
your battery.
- Hold Downs are sold in sets
$15.00/set
All Products proudly made in the U.S.A.
REM Rear Shock Tower
- Machined out of Billet 6061-T6 Aluminum.
- One Piece Design to maximize Strength
- Works with bandit spoiler support
allowing the use of the bandit or other
similar spoiler.
- Will work with any shock up to 1" thick
which allows the use of T-Maxx shocks.
- .200" (5mm) Thick to handle Extreme
Abuse.
- Designed to work with stock or after-
market Transmissions and Chassis.
- 20 shock mount locations and 4 camber
link mount locations for the ultimate in
tuning your suspension.
- Billet Aluminum shock standoffs.
- All mounting hardware included
- Uses Roll-Form Taps making threads
60% stronger than standard threads.
- Allows the XL-5 ESC to mount directly to
the tower for optimum cooling
REM 1020 $27.00
Stampede Stock Length chassis
- Machined out of Billet 6061-T6 Aluminum.
- .1/4" Thick to handle Extreme Abuse.
- Designed to work with either stock or
after-market chassis braces and skid-
plates.
- Includes Special Battery Hold-Downs
that mount the ESC. (VXL or XL-5). No zip-
ties or Velcro straps.
- INCLUDES OFNA antenna mount and all
mounting hardware.
- Machined for after-market ESC power
switches. No more zip ties to hold the
power switch. We have machined a
special cutout and drilled/tapped holes.
- Uses Roll-Form Taps making threads 60%
stronger than standard threads.
- Chassis weighs only 6 oz.
REM 1050 $45.00
- NEW! REM Transmission Case
- Made from Aircraft Quality Aluminum (6061-T6-511)
- CNC Machined for accuracy and strength
- "One-Piece Design" of the rear arm mounts for
strength
- Provides protection for your motor against rear
impacts
- Bolts up to stock wheelie bar mount without
modification
- Precision designed for perfect gear mesh
- The entire Transmission Case works as a large heat-
sink significantly reducing motor temperatures.
- Includes all fasteners for installation
- Uses Roll-Form Taps making threads 60% stronger
than standard threads.
- UPDATE: Now uses M4 fasteners for the Rear Arm
Mounts
Rem 1050 $62.00
REM Front Bulkhead
- Made from Billet 6061-T6 Aluminum for
strength and light weight.
- Perfect fit with stock or after-market
parts
- Uses Roll-Form Taps making threads
60% stronger than standard threads.
REM 1090 $27.00
REM Front Suspension Arms
- Made from Billet 6061-T6 Aluminum for
strength and light weight.
- Perfect fit with stock or after-market
parts
- All hardware included for installation
including stainless steel hinge pins
and retaining rings.
REM 1070 $21.00
REM Rear Suspension Arms
- Made from Billet 6061-T6 Aluminum for
strength and light weight.
- Perfect fit with stock or after-market
parts
- All hardware included for installation
including stainless steel hinge pins
and retaining rings.
- weighs only 1.4 oz per arm
REM 1080 $24.00
Stampede Chassis Braces
Made from Billet 6061-T6 Aluminum for
strength and lightweight.
Fits stock chassis and allows the use of stock
wheelie bar
Fits stock length and extended length REM
chassis'
"Smooth Design" limits the chance on getting
caught onrocks or uneven terrain
All hardware included for installation
Weighs only 2 oz.
REM-1100 $27.00
REM-1120 Rear Bearing Carriers
- An additional hole was added to give more
clearance forthe drive shaft when the
suspension is at "full droop" (as pictured)
- Low-Center-Of-Gravity Design allows you to
lower your truck an addition 5 mm over stock
- Made from Billet 6061-T6 Aluminum for strength
and light weight.
- Perfect fit with stock or after-market parts
REM-1120 $20.00